, 5 min read

Analysis And Usage of SSHGuard

Original post is here eklausmeier.goip.de/blog/2021/02-28-analysis-and-usage-of-sshguard.


To ban annoying ssh access to your Linux box you can use fail2ban. Or, alternatively, you can use SSHGuard. SSHGuard's installed size is 1.3 MB on Arch Linux. Its source code, including all C-files, headers, manuals, configuration, and makefiles is 8 KLines. In contrast, for fail2ban just the Python source code of version 0.11.2 is 31 KLines, not counting configuration files, manuals, and text files; its installed size is 3.3 MB. fail2ban is also way slower than SSHGuard. For example, on one machine fail2ban used 7 minutes of CPU time, where SSHGuard used 11 seconds. I have written on fail2ban in "Blocking Network Attackers", "Chinese Hackers", and "Blocking IP addresses with ipset".

SSHGuard is a package in Arch Linux, and there is a Wiki page on it.

1. Internally SSHGuard maintains three lists:

  1. whitelist: allowed IP addresses, given by configuration
  2. blocklist: list of IP addresses which are blocked, but which can become unblocked after some time, in-memory only
  3. blacklist: permanently blocked IP addresses, stored in cleartext in file

SSHGuard's main function is summarized in below excerpt from its shell-script /bin/sshguard.

eval $tailcmd | $libexec/sshg-parser | \
    $libexec/sshg-blocker $flags | $BACKEND &
wait

There are four programs, where each reads from stdin and writes to stdout, and does a well defined job. Each program stays in an infinite loop.

  1. $tailcmd reads the log, for example via tail -f, which might contain the offending IP address
  2. sshg-parser parses stdin for offending IP's
  3. sshg-blocker writes IP addresses
  4. $BACKEND is a firewall shell script which either uses iptables, ipset, nft, etc.

sshg-blocker in addition to writing to stdout, also writes to a file, usually /var/db/sshguard/blacklist.db. This is the blacklist file. The content looks like this:

1613412470|100|4|39.102.76.239
1613412663|100|4|62.210.137.165
1613415749|100|4|39.109.122.173
1613416009|100|4|80.102.214.209
1613416139|100|4|106.75.6.234
1613418135|100|4|42.192.140.183

The first entry is time in time_t format, second entry is service, in our case always 100=ssh, third entry is either 4 for IPv4, or 6 for IPv6.

SSHGuard handles below services:

enum service {
    SERVICES_ALL            = 0,    //< anything
    SERVICES_SSH            = 100,  //< ssh
    SERVICES_SSHGUARD       = 110,  //< SSHGuard
    SERVICES_UWIMAP         = 200,  //< UWimap for imap and pop daemon
    SERVICES_DOVECOT        = 210,  //< dovecot
    SERVICES_CYRUSIMAP      = 220,  //< cyrus-imap
    SERVICES_CUCIPOP        = 230,  //< cucipop
    SERVICES_EXIM           = 240,  //< exim
    SERVICES_SENDMAIL       = 250,  //< sendmail
    SERVICES_POSTFIX        = 260,  //< postfix
    SERVICES_OPENSMTPD      = 270,  //< OpenSMTPD
    SERVICES_COURIER        = 280,  //< Courier IMAP/POP
    SERVICES_FREEBSDFTPD    = 300,  //< ftpd shipped with FreeBSD
    SERVICES_PROFTPD        = 310,  //< ProFTPd
    SERVICES_PUREFTPD       = 320,  //< Pure-FTPd
    SERVICES_VSFTPD         = 330,  //< vsftpd
    SERVICES_COCKPIT        = 340,  //< cockpit management dashboard
    SERVICES_CLF_UNAUTH     = 350,  //< HTTP 401 in common log format
    SERVICES_CLF_PROBES     = 360,  //< probes for common web services
    SERVICES_CLF_LOGIN_URL  = 370,  //< CMS framework logins in common log format
    SERVICES_OPENVPN        = 400,  //< OpenVPN
    SERVICES_GITEA          = 500,  //< Gitea
};

2. A typical configuration file might look like this:

LOGREADER="LANG=C /usr/bin/journalctl -afb -p info -n1 -t sshd -o cat"
THRESHOLD=10
BLACKLIST_FILE=10:/var/db/sshguard/blacklist.db
BACKEND=/usr/lib/sshguard/sshg-fw-ipset
PID_FILE=/var/run/sshguard.pid
WHITELIST_ARG=192.168.178.0/24

Furthermore one has to add below lines to /etc/ipset.conf:

create -exist sshguard4 hash:net family inet
create -exist sshguard6 hash:net family inet6

Also, /etc/iptables/iptables.rules and /etc/iptables/ip6tables.rules need the following link to ipset respectively:

-A INPUT -m set --match-set sshguard4 src -j DROP
-A INPUT -m set --match-set sshguard6 src -j DROP

3. Firewall script sshg-fw-ipset, called "BACKEND", is essentially:

fw_init() {
    ipset -quiet create -exist sshguard4 hash:net family inet
    ipset -quiet create -exist sshguard6 hash:net family inet6
}

fw_block() {
    ipset -quiet add -exist sshguard$2 $1/$3
}

fw_release() {
    ipset -quiet del -exist sshguard$2 $1/$3
}

...

while read -r cmd address addrtype cidr; do
    case $cmd in
        block)
            fw_block "$address" "$addrtype" "$cidr";;
        release)
            fw_release "$address" "$addrtype" "$cidr";;
        flush)
            fw_flush;;
        flushonexit)
            flushonexit=YES;;
        *)
            die 65 "Invalid command";;
    esac
done

The "BACKEND" is called from sshg-blocker as follows:

static void fw_block(const attack_t *attack) {
    unsigned int subnet_size = fw_block_subnet_size(attack->address.kind);

    printf("block %s %d %u\n", attack->address.value, attack->address.kind, subnet_size);
    fflush(stdout);
}

static void fw_release(const attack_t *attack) {
    unsigned int subnet_size = fw_block_subnet_size(attack->address.kind);

    printf("release %s %d %u\n", attack->address.value, attack->address.kind, subnet_size);
    fflush(stdout);
}

SSHGuard is using the list-implementation SimCList from Michele Mazzucchi.

4. sshg-parser uses flex (=lex) and bison (=yacc) for evaluating log-messages. An introduction to flex and bison is here. Tokenization for ssh using flex is:

"Disconnecting "[Ii]"nvalid user "[^ ]+" "           { return SSH_INVALUSERPREF; }
"Failed password for "?[Ii]"nvalid user ".+" from "  { return SSH_INVALUSERPREF; }

Actions based on tokens using bison is:

%token SSH_INVALUSERPREF SSH_NOTALLOWEDPREF SSH_NOTALLOWEDSUFF

msg_single:
    sshmsg            { attack->service = SERVICES_SSH; }
  | sshguardmsg       { attack->service = SERVICES_SSHGUARD; }
  . . .
  ;

/* attack rules for SSHd */
sshmsg:
    /* login attempt from non-existent user, or from existent but non-allowed user */
    ssh_illegaluser
    /* incorrect login attempt from valid and allowed user */
  | ssh_authfail
  | ssh_noidentifstring
  | ssh_badprotocol
  | ssh_badkex
  ;

ssh_illegaluser:
    /* nonexistent user */
    SSH_INVALUSERPREF addr
  | SSH_INVALUSERPREF addr SSH_ADDR_SUFF
    /* existent, unallowed user */
  | SSH_NOTALLOWEDPREF addr SSH_NOTALLOWEDSUFF
  ;

Once an attack is noticed, it is just printed to stdout:

static void print_attack(const attack_t *attack) {
    printf("%d %s %d %d\n", attack->service, attack->address.value,
           attack->address.kind, attack->dangerousness);
}

5. For exporting fail2ban's blocked IP addresses to SSHGuard one would use below SQL:

select ip from (select ip from bans union select ip from bips)

to extract from /var/lib/fail2ban/fail2ban.sqlite3.

6. In case one wants to unblock an IP address, which got blocked inadvertently, you can simply issue

ipset del sshguard4 <IP-address>

in case you are using ipset as "BACKEND". If this IP address is also present in the blacklist, you have to delete it there as well. For that, you must stop SSHGuard.